Honda ATV Forum banner
1 - 2 of 4 Posts

· Registered
2 Posts
Discussion Starter · #1 ·
I snorkeled my foreman this past week this was my first time building a snorkel. I used 1.5 in pvc ran out and over the fender so I didn't have to cut my plastics. I ran all the vents blah blah blah. I tested it out today and it did fine deepest I went was over the plastic but under the racks. Never had a problem. I get home and I check the air box and there is water in the bottom. Air filter is dry and oil looked good. anyone know the cause?? Also I ran the pvc in the factory boot of the air box and tightened the hell out of the clamp. Thanks in advance
1 - 2 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.