Honda ATV Forum banner

1 - 17 of 17 Posts

·
Super Moderator
Joined
·
142 Posts
Discussion Starter #1
Congrats to fishfiles for winning this month!

fishfiles



2000 TRX450-SS : Hooked-Up
450 jug sleeved for 93.5 J+E custom piston and Total Seal Gapless rings , TRX400 head ( smaller combustion chamber/higher compression ) intake dog house ported , HMF exhaust and Dyno-Jet carb jet kit , K+N air filter , snorkeled , 34.5% reduction/1 piece primary gear , EBC Racing clutch kit and HD springs , Wide Open 4x2 kickoff , shimmed front diff , 6 inch front a-arms with grease-able Helms , Cobra custom axles , structural pipe steering bars with Helms , Brute Force 750 shocks , 6 1/2 stretched swing arm , disc conversion front and rear , hydraulic brake conversion front and rear , Grizzly 700 left brake lever , foot brake extension , Gold Wing 1000 foot brake master cylinder , billet remote reservoir , Fragola brake hoses and fittings , dual Duracell batteries , relocated double stacked oil coolers with a BigMo custom cooler cover , dual fans , one fan on engine , one fan on cooler , headlight/dash pod raised 7 inches and fitted with a LED light and Garmin GPS mount , front head lights replaced with LEDs, 20 inch LED bar on front rack , 2 LED pods on rear rack ( for night time tailgaters ) , 1000 watt BOSS BlueTooth sound system , 4 pod speakers , wired to MP3 player w/ 300 song capacity / +FM Radio , Warn winch , extended fairlead for custom front bumper guard , custom stick stoppers , 2 inch spacers in rear and 1 inch in the front , 29.5 Outlaws on ITP SS alum.rims , rear view mirror , Gerber machete holder , aluminum rear deck with imitation Yeti ice chest and S.S. tie downs , floor boards , custom Dodge a/c drier drink holder with imitation Yeti coo'ze (LOL) , dual Pelican boxes , one box is for amp , MP3 player and cell phone , other box for storage , grease fittings tapped in axle tubes and drive shaft tube , reverse lock out by-pass gizmo , receiver hitch , OEM tool kit , GoldWing Eagle license plate and flag holder
 

·
Premium Member
Joined
·
1,075 Posts
Congrats!

Sent from my SM-G930T using Tapatalk
 

·
Registered
Joined
·
682 Posts
Congrats fish, nice build.
 

·
Premium Member
Joined
·
12,271 Posts
Thanks to all !!!!

Wow , GirlsRideToo gave Hooked Up a run for the money ---------- I got a feeling that this month is GirlsRideToo time --------- let's see them camo shorts , the AK and a hog on the back rack
 

·
Premium Member
Joined
·
1,034 Posts
Congrats bud! I knew you had this one! lol
 

·
Registered
Joined
·
613 Posts
Thanks to all !!!!

Wow , GirlsRideToo gave Hooked Up a run for the money ---------- I got a feeling that this month is GirlsRideToo time --------- let's see them camo shorts , the AK and a hog on the back rack
Glad I could make this a little bit of a challenge for you, Fish. LOL.

Hog on the back rack....too funny!!

Congrats!! Great job, Fish.
 

·
Registered
Joined
·
21 Posts
Attaboy Fish! My hat's off to you. I am in awe of someone who can take a pile of parts from six different machines, some new some old, throw in a few hunks of rusty iron from behind the shed and come up with a fully functional world class butt-kicker!
 

·
Premium Member
Joined
·
2,535 Posts
Good for you Fish. Congrats
 

·
Premium Member
Joined
·
12,271 Posts
Thanks to all !

Wreckless , I am not really worried about the gift certificate , I never cashed in on the other two certificates that I won , donate it to the next winner ----- but I would like the Gold Member status thing , when does that start up again , have not seen an email or private message yet
 

·
Premium Member
Joined
·
2,535 Posts
Nice!!!
i thought i posted congrats to you, maybe i just put in a like. mighta posted on a different thread. hope not on a different forum. :eek , oh well..
you got a "duke's of hazard horn" on that thing yet? :grin
 

·
Premium Member
Joined
·
12,271 Posts
No Horn 'Ted , but it does have a horn button , the 4x2 was mounted in the fender , I moved the shifter and had a hole , stuck a push button starter switch in the hole , had thought about a horn to mess with people ---I have a secret weapon that I was thinking of hooking up to that "horn " button , I have a small water tank for a window washer , it hides perfect behind the oil cooler , and can have the nozzle and hose hidden in the front grill , people in front of me can get water soaked , LOL

I took the lift kit out the bike and swopped the rear shocks to some that are 3 inches shorter to get it level and still keep the 6 1/2 inch swing arm , it dropped it down a little over 5 inches ---I sent the lift kit back and was credited , the guy who built the kit is a 300 lift guy and it was his first attempt at the 450 , and it wasn't right , had trouble with the right side cv-shaft popping out the diff , the 450 diff is not in the middle of the frame , making the kit non-symetrical ---I have the bike ready to ride today , been talking with builders about another kit , but , not sure if I want to put a it on the 450 , might just have one built for my 300 and leave this 450 like it is in this pic
 

Attachments

1 - 17 of 17 Posts
About this Discussion
16 Replies
14 Participants
fishfiles
Honda ATV Forum
We’re a forum community dedicated to Honda ATV owners & enthusiasts. Come join the discussion about upgrades and reliability for your Rancher, Foreman, Recon, FourTrax, Pioneer, and more!
Full Forum Listing
Top