Honda ATV Forum banner

Filling cracks and scratches

1243 Views 1 Reply 2 Participants Last post by  Goober
Had my first attempt at fixing my plastics with a soldering gun. Seems to hold very nicely but the previous owner had them zip tied for a long time and the cracks didn't match up the greatest on the front side. My question is how should I finish the front? Was thinking either fill with a clear epoxy then sand and polish or go ahead and plastic weld the front side then try to sand it smooth and polish it. What do you think?


See less See more
1 - 1 of 2 Posts
Nicely fitted! I’ve not done this but there’s a couple projects i can reference
Search for most recent from @MrC. Real good job on a tatty TRX300
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.