Honda ATV Forum banner

Ebs mxs brake pads

3789 Views 23 Replies 6 Participants Last post by  TRX2fiveO
Im trying to put these new ebs pads on my 400 ex. i pushed the caliber piston in as far as it will go. The pads are to thick still. What can I do?
1 - 6 of 24 Posts
How much space is there between the pads?
I use a C-clamp to compress the piston back. Usually is a tight fit anyway you do it.
I've never had luck with any parking brakes. Never seemed to want to work right. Especially with the drum braked hondas.
There are a few companies that make block off plates for the caliper. Does your EX have the park brake lever on the clutch like the other hondas? If so, you might be able to just scrap the stock clutch perch and get a dirtbike style one, that look better with less going on.
You should start with rockymountain, i use their site a lot.
1 - 6 of 24 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.