[DanielSL]

Hey guys. Hoping one of you can ID these wheels for me. I am pretty certain they are indeed Honda, from internet photos I have looked over.

I have a 97' 300 Fourtrax 2x4, and it has 10 inch front wheels and 9 inch rear wheels. All four wheels are in horrible shape, and the tires are completely dry rotted.

I can score these wheels cheap, and they have pretty good shape 25x8 and 25x10 tires already mounted on them.

Can anyone tell me for sure if I can make them fir my 97' 2x4?

Thanks, ahead of time.

 

[DanielSL]

Those are stock take-offs from a Rincon 650 or 680. same bolt pattern but the wrong offset in the rear.

you will need a minimum 2 inch wheel spacer in the rear for them to fit right, or you can simply run the rears backwards and flip them. that will make them sit right.

Manny, could you elaborate on "run them backwards AND flip them"?

Do you mean to take the rear tires off, flip them over to reverse tread direction, and then run them inside out with the valve stems on the inside?

Would the wheels fit flush to the hubs like that? Would they be secure and safe?