helmut..i think we ran across this '91 trx350 the other day..and they never sold any of these in the states..not that i know of..lol..anyway..if your timming chain is to far stretched..messing with the chain adjuster wont solve your problem..not if your hearing a ticking from it anyway...if your chain is to far gone..so to speak..you can fix it the right way...buy a new one..orrrrr..you can give it a temp fix...the ******* way..lol..pull the tensioner out..tap a 10 mm socket onto the end of the plunger..or..you can take a piece of flat tin..or metal..cut it wide enough to go in the hole...bend it back around the plunger..crimp it real good..then..use the screwdriver to pull the plunger back..install it in the cylinder..start your bolts..try to get them as tight as posb..then take the screw driver out..finish tightening the bolts..crank it up..see how it does.
chain tensioner?
Hi again, how do you adjust the timing chain tensioner on a 1991 trx 350 ( same as (89 trx 350 foreman) the manual does not describe it well. Thanks Eric
1 - 6 of 15 Posts
i looked it up from the honda dealer websight..on fich..and they stoped making the trx350 in 89..not until 2000 did they come back out with the new 350's.Yeah, I remember the '91 TRX350.helmut..i think we ran across this '91 trx350 the other day..and they never sold any of these in the states..not that i know of..lol..anyway..if your timming chain is to far stretched..messing with the chain adjuster wont solve your problem..not if your hearing a ticking from it anyway...if your chain is to far gone..so to speak..you can fix it the right way...buy a new one..orrrrr..you can give it a temp fix...the ******* way..lol..pull the tensioner out..tap a 10 mm socket onto the end of the plunger..or..you can take a piece of flat tin..or metal..cut it wide enough to go in the hole...bend it back around the plunger..crimp it real good..then..use the screwdriver to pull the plunger back..install it in the cylinder..start your bolts..try to get them as tight as posb..then take the screw driver out..finish tightening the bolts..crank it up..see how it does.
what ..no pics with your answer ??..lmfao..your sliping !..lmfaooooo.Yeah, I already knew that, but I looked it up to make sure, too, when we were trying to figure out the '91.i looked it up from the honda dealer websight..on fich..and they stoped making the trx350 in 89..not until 2000 did they come back out with the new 350's.Yeah, I remember the '91 TRX350.
i want my dang pic's dangit !..rotflmao !If I would have had to type a lot to answer, then I would have posted pictures. LOL.what ..no pics with your answer ??..lmfao..your sliping !..lmfaooooo.Yeah, I already knew that, but I looked it up to make sure, too, when we were trying to figure out the '91.
welllllll crappppp !..lolNot this time. You'll have to wait. LOL.i want my dang pic's dangit !..rotflmao !If I would have had to type a lot to answer, then I would have posted pictures. LOL.
you arse !!!..lmfaoooooo..too funnyyyyy !Well, here you go, if you don't want to wait. LOL.welllllll crappppp !..lolNot this time. You'll have to wait. LOL.
Uploaded with ImageShack.us
1 - 6 of 15 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Honda ATV Forum
We’re a forum community dedicated to Honda ATV owners & enthusiasts. Come join the discussion about upgrades and reliability for your Rancher, Foreman, Recon, FourTrax, Pioneer, and more!
Full Forum Listing
Explore Our Forums
Top Contributors this Month
View All
oldskool83
40 Replies
THEHONDABUILDER
12 Replies
Eric the red
11 Replies
Recommended Communities
