[jeraldberald]

I've got to pull my centrifugal clutch, to replace the one way bearing, and none of my sockets are large enough for the lock nut in the center of the clutch. What size nut is this? does anyone happen to know? I already checked the manual, but couldn't find anything there, and I don't have calipers, so my only way to measure is to eyeball it with a tape measure.
also, Is there Anything I should know before doing this?
Thanks!

 

[jeraldberald]

Thanks, the bike is a 06 rancher 350 FE, and I borrowed a socket from a friend and it is 1-1/16.

 

[jeraldberald]

I went and got the bearing, which was 130$ from the dealer! im going to see if I can get a better price, but I still need to buy sealant. what would you recommend, and what is the installment procedure for the bearing and sealant?

 

[jeraldberald]

the sealant is for the front clutch cover. the dealer said there was no gasket. the manual says the clutch needs to be torqued i think it was 118nm. that is a lot.

 

[jeraldberald]

06 350 FE, and I got it all together, but I need to buy sealant, so I cant put the cover back on until tomorrow.
.

 

[jeraldberald]

RTV sealant? I got some permatex stuff. will that work?

 

[jeraldberald]

its RTV... what does that mean exactly?

 

[jeraldberald]

I got permatex black which is RTV. should I take It back or is it alright?

 

[jeraldberald]

ok thanks.