Honda ATV Forum banner

Carburetor settings

5196 Views 5 Replies 3 Participants Last post by  shadetree
A friend brought me a carburetor off of a Honda TRX 250TM6 four wheeler. She says she cannot find a number stamped onto the engine, but there is a sticker that says...Engine# TE21E-9003563. The carburetor is a Keihin. Markings on it are KTB, PD, C1F (A) EBK. There is a pilot screw on the bottom adjacent to the bowl, and what I think is an air mixture screw on the side of the carb body. I have cleaned the carb, and cannot find the settings for these two screws. Before I took them out, I closed them all the way. It took just shy of 4 turns to close the pilot, and 2 1/2 turns to close the screw on the side of the carb. Any help would be appreciated.

Attachments

See less See more
1 - 1 of 6 Posts
TRX250TM means that the carb is from a footshift Honda Recon.

The screw on the side is the idle adjust screw.

See screenshot for pilot screw setting. Depends on the year according to the manual, but you should be able to get with range.

Attachments

See less See more
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top