brand new on here help and hello

1119 Views 13 Replies 6 Participants Last post by pst, Jul 31, 2019

pst

Discussion Starter · Jul 29, 2019

I have just got a free 1991 200d fourtrax and I want to just fix it enough to use around the place here I do think when I get ti running I would like to change the gearing to the lower side I can not find a going shop manual for free download and I do not spend a lot on this and it looks like the tires are going to be a big part

See less See more

Save

1 - 2 of 14 Posts

Goober

· #2 · Jul 29, 2019

Lol common complaint is that these things aren’t cheap! It doesn’t run, you got it for free, and you don’t want to put much money in it. What’s your budget?

There are links in my signature block for the manual and parts suppliers.

Save

Reactions: 2

Goober

· #8 · Jul 30, 2019 (Edited)

YW very much glad to help.

Always buy OEM parts as long as you can and continue to ask questions.

the fuel tank looked good? Nice. Drain the old fuel out through the petcock and carb fuel line–get any solids outta there before you rebuild the carb. Is carb a keihin PD 63A?

Ok you saw it was chain drive and maybe easier to gear it down some. Best to also make sure the stock tire size is used–what are they 20 and 21 inch? That’s a limbo tire as low as you can go I believe lol!

The carb gaskets may be real brittle so here’s a shindy carb kit on fleabay. We have some great threads on cleaning carbs when you’re ready.

One last thing, best not to use a failed battery—it may kick start but if the battery won’t take a charge then you risk ruining the stator

See less See more

Save

Reactions: 1

1 - 2 of 14 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

brand new on here help and hello

pst

Attachments

Goober

Goober

Attachments

Top Contributors this Month