Honda ATV Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter #1
Does anyone know the answer to the question?
I have a acces cab so it does have a longer bed. I am concerned about the width..
I am getting a 09 Honda Ricon 680
thx
 

·
Registered
Joined
·
1,873 Posts
Welcome to the forums!!!!
 

·
Premium Member
Joined
·
6,616 Posts
I think you will make it. You will have to get over the wheel wells.
 

·
Registered
Joined
·
1,873 Posts
I Agree^^^ it will fit
 

·
Registered
Joined
·
1,280 Posts
I have an 08 foreman and a 93 toyota pickup, which is the same size as yours, more or less. It will fit in the width. You might have to hop it over the wheel well a little on one site, but it will squeeze in.

It will hang out a little but nothing a tie down won't cure. If you back it in [be careful] it fits better. If you go in forward you'll need to chock the wheels so the front end doesn't hit the window. If you back it in, the rear wheels will hit the front of the bed and it won't touch the window....but, it's a little tricky to do.
 

·
Registered
Joined
·
1,873 Posts
I agree with pain 100% I have to do the same thing with my grizzly in my 87 toyota.
 

·
Registered
Joined
·
459 Posts
Hey Welcome!! I've got a quad cab Tacoma TRD Sport with a short bed and my Rincon fits perfect with the gate down. Be very careful and make sure you don't run your Rincon bumper through the rear window. I speak from experience and trust me there are better ways to spend $1200 dollars. Make sure you put some blocks or something between the front tires and the bed of the truck so that the Rincons bumper wont hit the window.
 
1 - 11 of 11 Posts
Top