Honda ATV Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
Hey guys hoping someone make be able to help me out with routing this throttle cable. It's on an 84 200x, can't seam to find any diagram which show how the cable is routed, just bought a NOS cable on eBay so I know it's the correct cable. I have a manual and see nothing I there any help would be appreciated


Sent from my iPhone using Tapatalk
 

·
Premium Member
Joined
·
377 Posts
It should go up the right side of the top frame tube through the aluminum tabs... If the tabs are still there..lol

And at the head set, it goes under the top plate that bridges the forks...

So between the two plates that connect the forks to the head set..
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #3 ·
It should go up the right side of the top frame tube through the aluminum tabs... If the tabs are still there..lol

And at the head set, it goes under the top plate that bridges the forks...

So between the two plates that connect the forks to the head set..


Any chance you have a picture?


Sent from my iPhone using Tapatalk
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top