So I got this thing in a non running condition and I've been going thru the entire electrical system to figure out its problems and I come to the stator. My question is as follows. There are a total of 5 wires, 2 of which go to the pickup, and the other 3 go to the coils. 4 go to a plug including two from the coil and two from the pickup. The fifth wire is a black wire that goes to the coils and connects to a quick connect by itself and goes up to the cdi. Is this black wire supposed to ground or is that what is causing all my starting issues? If it is incorrectly grounding I will obviously have to replace and see if it fixes my problem.