Honda ATV Forum banner

'98-'01 Foreman S (TRX450S) electrical repair

640 Views 3 Replies 4 Participants Last post by  JohnnySolo
I have a beat up Foreman S that I need to get running. Not sure what year, but its '98-'01. I really just need it to start and run I don't need any of the non essentials like headlights and the multifunction display. As far as I can tell the mechanical components are in good condition and I just need to change out all the fluids/filters, but the electrical is all sorts of cobbled. I have some experience with cars, but never worked on an ATV. The only things that need electricity are the starter, ignition coil, and the alternator, correct? The wiring harness is intact and attached to the frame, but I have no idea where these things plug in. I found some diagrams, but they weren't helpful in finding parts. Seems like there's a ton of little plastic components and wires that I don't need so I'm about to just get a standard fuse box and start cutting to wire all this stuff together if I can't find the OEM parts.

Short version: electrical is all disconnected and mechanical looks okay. If I get a battery, fuse box, solenoid, ignition switch, and regulator, can I just wire this stuff up manually and start driving?

This thing is up on some property that's about a 40 minute hike from the closest place to park so I only have some photos until I go back up there.
1 - 1 of 4 Posts
Please refrain from using strong adult language here. Thank you.
  • Like
Reactions: 1
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.