Honda ATV Forum banner

92 Fourtrax 350

721 Views 2 Replies 3 Participants Last post by  SamUK
Hey All.
I just bought a 92 trx350 that went in to gear when it was off, when running you put in gear and it wouldn't move. Changed the clutch basket {old one was wore out and burnt} wet clutch is good. When i put it all back together. I now only have 2 gears and it still wont move. The adjustment srew only moves when the case is off.
Any help would be great, I am about ready to burn it.
1 - 1 of 3 Posts
I wouldn’t get overly frustrated; it’s trying to communicate with you. ?
Do you have the service manual and parts links in my signature block below?
Now i have not gotten into mine, an 86, but basically the same. @SamUK or others can probably identify the problem.
Did you use the proper wet clutch oil and not regular motor oil?
There are two clutches a change clutch and a centrifugal clutch; you just changed the plates in the change clutch?
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top