I'd tap that material back to the wall with a flatblade and dremel it so the valve seats. The hole is irrelevant if the valve seats. You'd end up with a tiny crack instead of a huge gap.
91 trx300fw with chip in cylinder head what to do
Took my 91 I just bought apart and found the cylinder head had some chips near the valves but didn't seem to affect them. Except my exhaust valve leaks but does not leak where the chip is. What should I do Do I need a new head or can I get it fixed
Attachments
1 - 1 of 12 Posts
1 - 1 of 12 Posts
