Honda ATV Forum banner

87 trx 250x brake question

2171 Views 9 Replies 4 Participants Last post by  Billy250X
i am looking at a 87 trx250x. i went and saw it today and the brakes had been removed because the owner was going to replace them but never got around to it. however he has all of the brakes and it is all new. how hard is it to install the brakes and scince i am not the best with mechanics about how much would it cost to have a shop install the brakes.
1 - 3 of 10 Posts
Welcome to the Forums!
To have a shop do it would be ugly! They are always HIGH!
Is it just pads or has the hydralics been unhooked. Calipers etc????
The only pain in the but is bleeding the brakes. I would get a service manual for the proper way to reasemble and to make sure you have everything you need.
Honda has them and then you could try some online sources like Ebay.
Somebody may be able to find you a download for one.
1 - 3 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.