Honda ATV Forum banner

1 - 10 of 10 Posts

·
Premium Member
Joined
·
6,616 Posts
My 450 rear shock is out of the quad. I can measure from eye to eye and how thick the mounting points are. You could then measure the same on yours. That will tell you if it will work.
 

·
Premium Member
Joined
·
6,616 Posts
You probably can't use the linkage.
 

·
Registered
Joined
·
2,735 Posts
Yeah it's like putting the raptor shock in the 250x.You just lose the linkage and direct it to the original mounting points.
 

·
Premium Member
Joined
·
6,616 Posts
By not using the linkage on a swingarm that uses linkage you are drasticly changing the geometry.
 

·
Registered
Joined
·
2,735 Posts
Well everyone said it would work.But who knows.
 

·
Premium Member
Joined
·
6,616 Posts
I don't doubt that it would fit like that. That would make the quad sit really high. My bottom mount on the shock sits level with the bottom of the swingarm. By not using linkage you would raisee the back about 3".
 

·
Registered
Joined
·
99 Posts
Discussion Starter · #8 ·
I got it all mounted on, its fits good. I had to use the piece of the linkage that went to the swingarm from the 400 shock and the it sits even a lil bit lower. It works real good
 

·
Registered
Joined
·
2,735 Posts
Glad to here that bud.Now some pics please.LOL
 
1 - 10 of 10 Posts
Top