Honda ATV Forum banner

450 foreman A-arms

1146 Views 2 Replies 2 Participants Last post by  Helmut
Ok so the dust seals on the front drive shafts are cracked and probly need to be replaced on my 04 450 foreman. The tool to remove the balljoints is 180.00 bucks. Is there any small automotive tools that will work. I did the ones on my rancher back in 05 but the pickle fork tore the boots. Can I unbolt the A-arms and pull the axle shafts that way? Thanks in advance
1 - 1 of 3 Posts
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.