Honda ATV Forum banner
1 - 1 of 5 Posts

· Premium Member
4,390 Posts
Check for dirty/loose battery cables or a dirty/loose ground. Those would make you have no power and make it not charge. Thats what it sounds like to me. I always just loosen both cables and tighten them a few times to clean them on the trail. But sand paper or a wire brush does the trick when you get home. Also coat them in die electric grease when you do the finaly repair.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.