Honda ATV Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I have a 01 400ex and i am doing the spring clean on her. i decided to clean my carb.. oops
Any way carb is now clean but when i went to put back together i believe i am missing a part. my question is is thier a rubber hose or cap that goes between the diaphram in the float bowl and the body of the carb. i thought i saw a back insert in thier it goes from the linkage to the stem on the diaphram? Am i missing this or are the carb cleaner fumes getting to me??? please help i can try to send pics if needed. I looked everywhere and i can not find it. I also can not find it on any schematics??
 

·
Premium Member
Joined
·
23,581 Posts
I have a 01 400ex and i am doing the spring clean on her. i decided to clean my carb.. oops
Any way carb is now clean but when i went to put back together i believe i am missing a part. my question is is thier a rubber hose or cap that goes between the diaphram in the float bowl and the body of the carb. i thought i saw a back insert in thier it goes from the linkage to the stem on the diaphram? Am i missing this or are the carb cleaner fumes getting to me??? please help i can try to send pics if needed. I looked everywhere and i can not find it. I also can not find it on any schematics??
Do you see the part in this diagram?

 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
Thanks Helmut you are the man..... it is the boot. I could not find it on Bikebandit..

I hope all your cylinders are always firing..
 

·
Premium Member
Joined
·
23,581 Posts
Thanks Helmut you are the man..... it is the boot. I could not find it on Bikebandit..

I hope all your cylinders are always firing..
I had a feeling it was the boot, but I didn't know for sure.
 

·
Registered
Joined
·
2,735 Posts
Thats really not that much to worry about.
 

·
Premium Member
Joined
·
23,581 Posts
Yeah, I doubt you would really need that. That's just to keep the dust and dirt out.
 
1 - 6 of 6 Posts
Top