Honda ATV Forum banner

300ex axel swap

964 Views 3 Replies 4 Participants Last post by  Bickford
I wrecked my 2003 honda 300ex down a hillclimb and bent the axle so here is my question. When I replace the axle do I have to replace the seals and berrings or just the seals or anything at all. your reply will be greatly appreciated Thanks
1 - 1 of 4 Posts
Usually you just put the new axle in but if you see that anything is worn replace it while it's a part.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.