Honda ATV Forum banner

26" or 27" Bear claw htr on stock 02 450s?

4007 Views 9 Replies 3 Participants Last post by  shadetree
I recently picked up a clean 02 450s foreman and am looking to upgrade the tires. I dont want to lift it and plan on running the stock wheels. I also was given a spare set of rear wheels with the bike and thought about putting the rear wheels on the front with either 26x11 or 27x11 on them. I am leaning toward the Kenda bear claw htr's. Without the lift do you guys recomend the 26 or 27's. Thanks.

Attachments

See less See more
2
1 - 5 of 10 Posts
I recently picked up a clean 02 450s foreman and am looking to upgrade the tires. I dont want to lift it and plan on running the stock wheels. I also was given a spare set of rear wheels with the bike and thought about putting the rear wheels on the front with either 26x11 or 27x11 on them. I am leaning toward the Kenda bear claw htr's. Without the lift do you guys recomend the 26 or 27's. Thanks.
Thanks. I just ordered the High Lifter springs for the front and back. The stock ones were sagging at least an 1 1/2" so they were shot. I think I am just going to get the 26's I hear they measure in at almost 27" anyway.
26x11x12 or 27x11x12. I didnt add the rim diameter in the first post.
Thanks. The hand guards were on the bike when I bought it. They are olive green and made by Moose.
1 - 5 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top