Honda ATV Forum banner

2019 Rancher 420 Maintenance

2495 Views 5 Replies 3 Participants Last post by  [email protected]
I'm coming up on 100 miles and the glove box book and the Helms manual both say check the valves. Or, I guess it's I for inspect.

I'm planning on doing all my own work so I don't intend to take it into the dealer and have them charge $500 (or anything) and then check the valves by listening to it.

However the book says replace the o rings around the 2 adjustment ports or holes and where the top dead center is observed.

I went to the dealer and they only could get the two end ones and then it would take a week.

So I need, as I needed anyway, to find a Honda ATV discount online supplier.

I know they are out there for Honda cars. I can get car parts sent to my door with a discount that, after shipping is less than the dealer will charge.

Does anyone have a parts supplier for Honda ATV parts. The nearest dealer to me is 50 miles each way, and they seem to have no parts in stock (unless that is their way of steering people into their service department.)

I probably don't really need to replace those o rings, but I'd like to have them around for when I do.

1 - 1 of 6 Posts
My favorite online OEM parts retailer has become Partzilla and Honda East Toledo are alternates only because RMATV is usually cheaper than Partzilla AND way faster to ship parts that are in stock. Partzilla has the best parts fiche (with interchange lists) of them all though.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.