Honda ATV Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Alright so I got a 2014 Trx450r and I can't figure out the fuel adjustment screw. Where it's suppose to be is a pin that you can pull out but when I do I can't adjust anything because it's a flat brass thing inside. Can it be adjusted? Would a quick adjust work on it if I buy a 06 and up fuel adjustment screw from eBay?
 

·
Registered
Joined
·
1,373 Posts
It's a screw that has a D shape on the end, and requires a special tool to turn it with the carb still installed. If the carb is off the quad you can use needle nose pliers to turn it. I'm not sure why Honda changed from just using a flat screwdriver to turn it.

You can replace it with an FCR screw from eBay, and I would recommend it. Probably cheaper and easier than tracking down the official tool.

Rob
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top