Hey guys I'm hoping that maybe you can give me some insight. My quad was acting up a little when I stood it up in a wheelie it would bog out a little. so I decided to take off the carburetor and clean it. I took out the Jets and made sure they clean sprayed it with carburetor cleaner looked at the accelerator pump and check the flow everything seemed good I did not adjust anything. Now that my bike has been put back together it's running like crap if you hit the throttle fast it sputters and when you give it a lot of gas and gear it also sputters now and it never did that before. I change a spark plug and I also reset the valves after this issue occurred and didn't help. The valves are set at intake .10 and exhaust at point 1 2. Please help