Honda ATV Forum banner

2014 Foreman 4x4 will not engage

988 Views 5 Replies 2 Participants Last post by  teallen
2014 Foreman manual shift with power steering, the 4x4 will not engage. I have checked all the relays and diodes as well as a connections. The actuator will engage when you put 12volts to it. The handlebar switch is new and there was a problem with the power steering and the ecm was replaced. The power steering works now but 4x4 still don't. The bike had both of these problems when it was brought to me. Thanks for any ideas that anyone may have.
1 - 3 of 6 Posts
Did you put 12v on it before the switch to test the switch?
Test between the switch and connector in the pic and here is a link to the service manuals for more testing procedures.


See less See more
Is any thing blinking like it's throwing a code? Long and short blinks?
1 - 3 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.