[Thaskin]

Hello all from the state of New York. Been working on my 2010 420 Rancher. Wife's family was over riding the quad failed to start I replace the battery in solenoid since the battery has not been replaced since new after battery replacement it just clicked and replace solenoid machine still just clicks when trying to start checked all fuses and I have power to starter still just clicks replace the starter and now I don't have power to the front end no lights or no neutral lights battery light Etc around handlebars I then replace the ignition switch still nothing am I missing something? Still have power up to the starter.

 

[creed82]

Hello all from the state of New York. Been working on my 2010 420 Rancher. Wife's family was over riding the quad failed to start I replace the battery in solenoid since the battery has not been replaced since new after battery replacement it just clicked and replace solenoid machine still just clicks when trying to start checked all fuses and I have power to starter still just clicks replace the starter and now I don't have power to the front end no lights or no neutral lights battery light Etc around handlebars I then replace the ignition switch still nothing am I missing something? Still have power up to the starter.

Your problem is a mystery to me, and I'm very sorry. The reason you buy a Honda is so that you never face this sort of problem...right? Hope somebody else chimes in soon with some expertise.

 

[shadetree]

when you replaced the starter solenoid, was it with oem from honda ?, or china junk from amazon or ebay ?. did you make 100% certain all your battery cables are connected correctly and tight ?.

 

[Jeepwm69]

replace the starter and now I don't have power to the front end no lights or no neutral lights battery light Etc around handlebars I then replace the ignition switch still nothing am I missing something? Still have power up to the starter.

Sounds to me like you left a ground wire off when you put the new starter on.