Honda ATV Forum banner

2007 Honda Rancher 4x4ES Parts interchangeability

1113 Views 8 Replies 6 Participants Last post by  Carolynskiii
Greetings all. I am hear to share a lesson learned. I purchased a 2007 Honda Rancher ES from an online auction. When I got it home I found that it had no brakes. Well I mean to say that the cable on the rear brake was broken so the back brakes may work but on the front there were no brake or calipers or master cylinder or brake handle. Yea I know I should have seen that in the pictures but I was actually bidding on a tractor and this was an impulse bid, is there such a thing? Well I am looking for a wrecked or blown motor one that I can pull all the parts I need but haven't found one yet. So here are my questions.

What model years are interchangeable with the 2007 Honda Rancher 4x4ES?
Where is the best place to buy parts?

Thanks for reading and I hope my mistake helps someone else from making the same.

1 - 1 of 9 Posts
In the front you're missing calipers brake cables master cylinder/lever.

You cant do much about the rear brakes because the hub is welded on so just go with front brakes.
Do get the brake lever for the rear brakes tho because you need it for the reverse cable.
Hopefully the rear diff is good cause if not you need an axle and hubs too to take care of that and then you could do rear brakes.

This will take care of the front brakes except for a little hardware you'll need but it looks like that bike is going to need a little more tlc than that tho lol
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.