Honda ATV Forum banner

2007 Honda Rancher 4x4ES Parts interchangeability

1113 Views 8 Replies 6 Participants Last post by  Carolynskiii
Greetings all. I am hear to share a lesson learned. I purchased a 2007 Honda Rancher ES from an online auction. When I got it home I found that it had no brakes. Well I mean to say that the cable on the rear brake was broken so the back brakes may work but on the front there were no brake or calipers or master cylinder or brake handle. Yea I know I should have seen that in the pictures but I was actually bidding on a tractor and this was an impulse bid, is there such a thing? Well I am looking for a wrecked or blown motor one that I can pull all the parts I need but haven't found one yet. So here are my questions.

What model years are interchangeable with the 2007 Honda Rancher 4x4ES?
Where is the best place to buy parts?

Thanks for reading and I hope my mistake helps someone else from making the same.

Jason
1 - 3 of 9 Posts
yes sorry it was a 420. Here is the VIN: 1HFTE359974001227
Sorry for the delay but here are some pictures of the hot mess I bought from the auction, lesson learned. The brake pictures are from the inside, did not have time to remove the wheel. It looks like the discs are there but I don't see calipers. Also there are no brake handles on the handlebars at all for front or rear brakes. I really think my best bet may be to try and find a wrecked one that I can cannibalize to make this one whole, just not sure what years are compatible.

https://photos.app.goo.gl/CXFZpIvSxNBeqtNQ2

Please let me know if the link does not work:nerd
1 - 3 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top