Honda ATV Forum banner

2006 honda rancher 350

Tags
honda 350
621 views 1 reply 2 participants last post by  shadetree 
#1 ·
So I have a Honda rancher 350 and I'm replacing the piston rings I have done this before and I've gone through all of the procedures, every step from Honda to disassemble everything correct finding TDC before taking everything apart.

my problem is that the piston its self is stuck and I'm not able to get it off to where I can replace the rings inside, I've never had this problem. before can someone please point me in the right direction.
 
#2 ·
is the piston stuck on the rod/wrist pin ?, or is it stuck in the cylinder ?. either or, if its any of these two ?, chances are, your gonna need more than just rings to fix it !.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top