Honda ATV Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
2006 honda 400 trxfa, stuck in 4th gear. ecu blinks 12 times, telling me it is ecu, bad wire harness conection or the gear posistion switch. i looked at the parts breakdown and cannot find gear posistion switch. is it the same thing as a sensor asm angle ?
 

· Premium Member
Joined
·
38,589 Posts
2006 honda 400 trxfa, stuck in 4th gear. ecu blinks 12 times, telling me it is ecu, bad wire harness conection or the gear posistion switch. i looked at the parts breakdown and cannot find gear posistion switch. is it the same thing as a sensor asm angle ?
if it's stuck in 4th gear..that alone should tell you it's not your ecu..bad wire connection..more than likely it's your angle sensor..honda had a recall on these models for this reason.
 

· Registered
Joined
·
4 Posts
Discussion Starter · #5 ·
thanks. very helpful forum. i like honda, but seems like there is alot of problems with the speed sensor. this is probably why honda in 2011 models you will have a choice for a foot shifter or esp . i was looking for a foot shifter in 2006, only foot shifter available was the 250cc.
 

· Premium Member
Joined
·
23,587 Posts
thanks. very helpful forum. i like honda, but seems like there is alot of problems with the speed sensor. this is probably why honda in 2011 models you will have a choice for a foot shifter or esp . i was looking for a foot shifter in 2006, only foot shifter available was the 250cc.
The 350 Rancher and the 500 Foreman were also available in the foot shift models in 2006.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top