[87turbogn]

I have a TRX 350 FE (2005 electric shift) and when the ignition is turned on the "N" indicator blinks 5 times. It will not shift. I replaced the angle sensor. I removed the shift motor and tested it. Is there a proceedure to reset the read out and what is it if there is? Any help would be appreciated !

 

[mud99]

Welcome to the forums. There is lots of questions about that. There is a few guys on hear that know there stuff and will help you shortly.

 

[Saber6]

 

[tomgodd]

sABER WILL TAKE CARE OF YOU wELCOME TO THE fAMILY!

 

[TRX2fiveO]

Welcome to the forums!!!

Saber is our Hero schematic guy!!! Our knight in semi-gloss armour

 

[87turbogn]

Yeah, I was screwin' around with the up & down swiches before and I could get the "N" light to stop blinking and it would shift but then the next time I went to move it, it started blinking again. The only thing I didn't do was the last thing you mentioned and that was to "push both switches to delete the problem code". It now, so far, is working properly. I don't have a service manual for this model and I checked other posts and couldn't find anything on this problem for this model so this has been very, very helpful ! Thank you !

 

[Saber6]

Glad to help!!