This doesn't add up. You're saying that while the light fuse is blown or pulled out, the engine won't start? Can you verify that by starting the machine, then cut it off, and pull the light fuse. Will it start?After running a while light fuse blows. Motor continues to run but once shut off will not re-start.
Unplug the fan, and pull the light fuse, and then check resistance between the fan and the light circuit. Sounds like you have a low resistance short.Also found that if I remove the fan fuse I no longer blow light fuse.
Ouija Board and crystal ball are both on the fritz, so unfortunately you're going to have to troubleshoot it. :tongue:What is the problem?