Honda ATV Forum banner
1 - 13 of 13 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I'm having problems with the electronic shifter on my Rancher. The electronic shifter stops working within 15 to 30 seconds after firing it up. I have replaced the shift sensor and the power shift motor. I've checked continuity on the shifter buttons, they are working. Also the emergency shifter is still functional. Any suggestions on how to proceed would be much appreciated.
 

· Premium Member
Joined
·
2,746 Posts

· Premium Member
Joined
·
2,746 Posts

· Registered
Joined
·
8 Posts
I'm having problems with the electronic shifter on my Rancher. The electronic shifter stops working within 15 to 30 seconds after firing it up. I have replaced the shift sensor and the power shift motor. I've checked continuity on the shifter buttons, they are working. Also the emergency shifter is still functional. Any suggestions on how to proceed would be much appreciated.
We manufacture a foot and hand shifter that bolts on to the existing shaft to manually shift your 4 wheeler. Order at hondaesshifter.com
 

· Registered
Joined
·
8 Posts
I'm having problems with the electronic shifter on my Rancher. The electronic shifter stops working within 15 to 30 seconds after firing it up. I have replaced the shift sensor and the power shift motor. I've checked continuity on the shifter buttons, they are working. Also the emergency shifter is still functional. Any suggestions on how to proceed would be much appreciated.
 

· Registered
Joined
·
8 Posts
I'm having problems with the electronic shifter on my Rancher. The electronic shifter stops working within 15 to 30 seconds after firing it up. I have replaced the shift sensor and the power shift motor. I've checked continuity on the shifter buttons, they are working. Also the emergency shifter is still functional. Any suggestions on how to proceed would be much appreciated.
 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top