Honda ATV Forum banner

1998 honda 400 foreman pulse generator

1089 Views 1 Reply 2 Participants Last post by  retro
My issue is that someone has cut the plug off the wiring harness that gose to the voltage regulator. My question is? Is what is the order of the three yellow with silver wires that come from the pulse generator an from left to right looking at the voltage regulator with 3 connectors on bottom an the other two on the top what is the correct pin out for the wires..

1 - 1 of 2 Posts
Please open just one thread per issue... Thanks.

You can use the wiring diagram in the back of the service manual and the regulator/rectifier troubleshooting photo in the charging system section of the service manual for reference. You can also search for photos of those two plugs on the fLeebay frau-ction site.

Welcome to the forums!
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.