[michaelaguarnieri]

Intermittent failure to shift to reverse. Angle sensor replaced, no luck. Now using the provided wrench to shift to neutral and then usually can shift to reverse. Read about reverse shift sensor issues and viewed photo on line. My unit does not appear to have the sensor? The Foreman is in good condition and has not seen rough use. Any ideas on the suspected problem? Tks!...Mike

 

[michaelaguarnieri]

Thanks for the suggestions!!!....Will put them to use in the near future and reply.....

 

[michaelaguarnieri]

Believe I zeroed in on the problem. The reverse button appeared to be sticking and not always locking in place. Disassembled, lubed, and re-installed. Problem appears to be resolved. Thanks for the suggestions!