Honda ATV Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
So, I'm searching for a brake cylinder that goes onto the front right hub. There are two cylinders. I need the rear one. I was able to get the others to break free, but this one is very seized.

I see the part number is 45350-HA7-651. However, the part is unavailable.

Is there an alternative brake cylinder? I'm wondering if a cylinder from a different year, or a TRX300 would fit. Has anyone verified an alternative part? They all look very similar.
 

·
Premium Member
Joined
·
5,956 Posts
The 350D takes two cylinders (total of 4) on each side and are unique. The rear ones on each side have a bleeder screw, so if you buy one make sure you order correctly. As far as interchange goes, you gotta buy the OEM TRX350 as far as I know. You'll probably have to find a good used one... or buy a complete set of used cylinders if yours were seized... because they are bound to be corroded and pitted if they seized.

Welcome to the forums!
 
1 - 3 of 3 Posts
Top