Honda ATV Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I have a 1986 TRX 70 that I am restoring. I have it completely torn down and have stripped the paint from the frame. I have also cleaned up and smoothed down the factory welds. I'm going to go back and weld up some of the welds that look weak. Before I do this I want to make sure the frame is completely straight. Just from doing a front view it looks to be a little off but it could just be the way its made. If anyone has any measurements that would help me verify its a straight frame I would appreciate it.
 

·
Premium Member
Joined
·
5,956 Posts
It does look quite a bit off. Was pretty rusty eh? I think the smallest ATC around here are 90s and 110s, so I probably can't help you much. A good friend of mine has about a dozen old ATCs and TRXs ranging from 90 up through several of the 350x models. The 70 may be the only one he doesn't have, but I'll ask him tomorrow some time and let ya know.
 
1 - 4 of 4 Posts
Top