Honda ATV Forum banner

18% Secondary gear reduction shift problems

2682 Views 3 Replies 3 Participants Last post by  Jeepwm69
So I've got the gear reduction in and I started slowly shaving the speed sensor down trying to get everything to work. Speedometer started reading but I can't get it to read a gear position. It just has a - or it'll give me a code for the shift angle sensor. Replaced that sensor tried a new shift motor. And I've shaved the speed sensor all the way down to the point of touching the gear. I've got one more speed sensor. Any advice would be greatly appreciated
1 - 1 of 4 Posts
Who made the reduction? That would be who I would call, they should be plenty knowledgeable about it.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.