[Caryd]

Starting off I'm new to this thread. I have an 08 rancher that fails to move. I start the bike and can shift and feel it shift. But applying throttle there is no movement at all. When the problem started it the bike would still move. It just seemed as though you were trying to go in 5th gear from a dead stop. But after riding a bit and the bike warm up the problem would go away. Now the bike will not move even under full throttle. I have the front cover removed as I believe the clutch is the issue. But there is no noticeable issues other than some wear on the weights and grooves in the outer drum. They are smooth not sharp or rigid but I'm not sure if this is my issue. Everything seems to be working properly. The outer drum will spin clockwise but not counter as I believe it should. I'm going to order new weights and outer drum. Does anyone believe this is my issue or have other theories. I'd like to add pics but not sure how

 

[Caryd]

I used the exact Honda oil from dealer

 

[Caryd]

Yes I adjusted the clutch adjustment screw. This just made the foot shifter harder to engage and make the shift between gears way rougher... if that makes sense.

 

[Caryd]

Ok so I opened it up and replaced pretty much everything. The only thing I left was the one way bearing as it seemed to be fine, and one friction plate and clutch plate as I didn't order enough. Slapped it back together today and here I am with the same exact issue. And now when I kill the bike I seem to here a whining noise. I jacked the bike up and it turns as should and can go through the gears. Just absolutely no power when I set it on ground. Any thoughts?