Honda ATV Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
2006 Trx350es
Starts, runs, but display is not there unless I unplug and replug wire socket, gray one up front under plastics with power turned on, once that is done, clock blinks at 1:00 and wont set.
Then I turn off power, turn back on power and display is gone again, until i unplug /replug electric socket to display.
I have 12v to brown/black wire to display. And green wire is ground.
There has to be a constant voltage on one of the wires giving display memory voltage. There in is my problem.
Thank you for any help.
Yes connections are all good, battery is good. Great power to everything, just not to memory for display.
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #4 ·
You should have 12 volts to red wire AND black brown wire
If clock is blinking and you cannot set it with buttons then you have a button problem, which is common
Thank you so very much.
Have a great Thanksgiving
 
1 - 3 of 3 Posts
Top