[tarhill1s]

My recon is not getting gas to the carb. I spray starter fluid and it cranks til the s. fluid is gone. have gas in tank and the off, on, res is in the on position. what next????

 

[Billy250X]

Something is blocking the jets or the fuel flow in the carb.Take it off and clean all the passage ways and jets really well.

 

[tarhill1s]

Thanks I'll try that!!!!

 

[Helmut]

Agree with Billy. Probably the needle valve is stopped up not letting fuel into the carb.

 

[mud99]

Looks like we have another Carolina member. Welcome to the forums.

 

[shadetree]

yep..float needle is stuck..or the jets are stoped up..time to take it apart..and clean the jets out..if you got a wire brush handy..pull one of the bristles out..and use this to stick through the jets to clean them out.this and compressed air,do not use anything bigger than this.if you do..you will mess the jet up big time