Honda ATV Forum banner


  1. 1986 trx350 engine noise

    New Member Introductions
    Hello everyone, picked up a 1986 fourtrax 350 the other day and its making a ticking noise from the motor. I have done research and found its probably either the cam chain being over stretched or the valve adjust being off. comparing my sounds to other videos on the internet mine doesnt seem as...
  2. old TRX350 no start

    Repair & Maintenance
    Morning folks - Need some help with this one. . . . Got a '92 honda TRX350 (yes, I'm in Canada LOL). I understand they are the same as the '89. we got the bike not running, with the charge wires from the stator melted. I replaced the stator with a used one out of an 88. Bike started right up...
  3. 1987 TRX350 Piston and Ring Replacements - Where to Buy?

    Honda TRX
    Hi All, I'm in the process of fixing up a 1987 TRX350 4x4 and have low compression as well as a lot of carbon build up. I'm assuming that I'll have to get the cylinder bored out and replace piston/rings. Can anyone let me know where I can get oversize parts? I'm having some trouble finding...
  4. 2006 Rancher 350fe Display

    Builds, Projects & DIY
    I'm getting ready to start a new project, and am looking to spice things up! The major puzzle piece I am trying to find information on are my options for a new Display(Meter). I am already looking into swapping (because the bike currently has missing) the standard 350 front Diff for a diff off...
  5. 1989 TRX350D fuel pump question

    Repair & Maintenance
    I am trying to figure out a problem I am having with my fuel pump on my 89 TRX350D. At first the 4wheeler started stalling out and I could not hear the pump running. I replaced the pump with a Mr Gasket low pressure pump but it runs all the time when the key is on. The oem pump never did...
  6. Rancher 350 fan wired direct?

    Honda Rancher
    Hi, has anyone wired a fan to a switch on a 2006 350? I can get it to work but the oil temp lights stays on all the time the fan's on. Is there any way to do this without disconnecting the thermosensor?