Honda ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 12 Results
  1. Honda FourTrax
    Got a 93 trx300 4x4. Have done a lot of work including top end and carb for the engine. This thing ran great after the carb and the top end then sat for a while. Now it will surge under throttle like it hits a limiter. Here's what I've checked: Timing is good Carb is clear, bought from rocky...
  2. Repair & Maintenance
    Hi all, new member and thanks in advance for any help. I'm pretty new to the atv world and I am now having a 4wd issue with my new(used) 1990 Fourtrax TRX300 4x4. This bike is supposed to be always 4wd but the front wheels won't pull. 4x4 was working up until about 2 months ago. From the...
  3. ATV General Discussion
    Have a 1993 trx300fw (4x4) that has a rusted out lower frame has anyone used a 2wd frame and cut and welded into a 4x4 if so was there any problems you can across or should it be fine
  4. Repair & Maintenance
    Having trouble finding replacement a arms for trx300ex, any pointers, or other models that would be compatible?
  5. Honda FourTrax
    Hello all, I have a 1988 TRX300 (2wd) produced in June of 1987, this seems like a very early model bike. How rare is it? (Picture isn’t the best but is a pic of the bike)
  6. Honda ATV Schematics / Manual Help
    I am having a lot of trouble identifying this Air Cleaner body, and cannot really match it to any part # on Riva. There is no part # on the Air Cleaner body. It seems to be similar to my 1988 Honda 300's Air cleaner body, exept that one has a much smaller opening. This body has a very large...
  7. ATV General Discussion
    I have a Honda foreman 450, the right side swing arm bolt with the castle nut locker broke off an stripped somewhat the threads. I was able to get the bolt for the opposite side to thread in an use the bolt for the side damaged on its opposite side with the lock nut. I plan to have someone weld...
  8. Brakes & Suspension
    Hey y'all this is my first post and I have a 1996 honda trx300 and I'm not planning on fixing the rear breaks just getting rid of them because they are seized and I don't want to deal with them but the two nuts on the axle are refusing to come off and I need this ready in a week so HELP
  9. Honda FourTrax
    Was just running great yesterday been working on is all night and day tightened valves to .006 made sure the timing chain was on dead center put new oil and still same noise with no start if you can help me in any way let me know thanks.
  10. Repair & Maintenance
    I’m new to the forum but need some help, so I’m going to buy a Honda 300 2wd tomorrow for $750 all it needs is a battery, what’s some common things I should look for before handing over the cash? Anything in particular to look for problem wise? Lastly I’m going to use the 4 wheeler to cross my...
  11. Performance Modifications
    Well i need all the help i can get. I just bought myself a 2003 TRX-300-EX that i know very lettle about. I know that he had put a stroker piston and has been bored...but i dont know how much. It has a raching clutch and new sprokets and chain. It had FMF header and silencer.he wrecked it and...
  12. New Member Introductions
    Hi all, am a nebie to all this! and seeking a little help. I have aquired a TRX300 year 89, struggling to get fired up, seems to flood pretty easily, the spark plug when out of the head sparks in-frequently and in all directions (and even without earthing against the cylinder casing is this...
1-12 of 12 Results
Top