Honda ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Repair & Maintenance
    rolls around in neutral but won’t say it’s in neutral it just gives - on the screen and all the other gears work and the neutral light worked before I replaced the main wiring harness any help would be helpful it’s the foot shift model
  2. Repair & Maintenance
    Hey guys. Lurked for quite awhile and have found some good info on other posts for other problems. I’m stuck with this one. I have a project atc in frame for a railrider. had the engine running and neutral switch worked and machine fired and ran fine. I had to lengthen the push start to it’s...
  3. Honda TRX
    My 07 Trx400ex cannot start in neutral without the clutch being pulled. The fuses are good, there are these 2 unconnected wires though. They say N and R for what I assume Neutral and Reverse but I couldn’t find the other end that wasn’t connected. Do these connectors not plug in any where. If...
  4. Honda TRX
    Hello all. I just acquired my first ATV. It’s a 99 fourtrax 309 2wd. The neutral light doesn’t work. The starter button in turn doesn’t work. I replaced the neutral safety switch and have the same result. I am assuming that I have a short or bad diode/fuse. Any assistance would be greatly...
  5. Honda FourTrax
    I started working on this quad trying to figure out why the neutral light would not come on, I read through multiple forums seeing that this was a fairly common issue in these quads and my neutral switch was good and found the issue was something else and wanted to share my experience Incase...
  6. Honda Rancher
    I have a 2000 Rancher manual shift. The atv is in neutral bc it rolls but the neutral light will not come on, so I cannot use the electric shift. I feel as though a wire is loose or plug has come loose. Where would I check the wires and how would I repair it? Thanks
1-6 of 6 Results
Top