Honda ATV Forum banner

honda rancher 420

  1. 26" or 27" tires?? Zillas or mud lites? Rancher 420 DCT

    Wheels & Tires
    Hello, new to the forum. This is my first post. Ok so I bought a 2016 Honda Rancher 420 DCT 4x4 SRA A few months ago, all stock when I got it. The only things I've done so far is put dual snorkel kit on it from going deep snorkel, I put a boss audio 450w Bluetooth stereo on the front rack, and I...
  2. 2009 Honda Rancher 420 AT Shutting Off

    Repair & Maintenance
    I have a 2009 honda rancher 420 AT. I will drive it for a while until it gets warm. Once I have driven it for a while, it decides to shut off. It will not crank back up unless you let it sit for a few minutes and it will come back on. The longer you let it sit, the longer it will run. I have...
  3. What gear reduction for a 14 trx420fpa on outlaw 3’s

    Gear Reductions
    Hello, I have a question for what gear reduction I should use for my 2014 Honda trx420fpa. I’m using 14 msa m12 diesels and 29.5 outlaw 2’s. My question is what gear reduction should I use, and can someone send me some links?
  4. 2015 Honda Rancher ES

    Repair & Maintenance
    I'm having problems with the electronic shifting on my 2015 Rancher 4x4. The problem seems to be only when I am trying to shift from 1st to 2nd gear. It will not shift unless I am at really high RPM levels, much higher than before. When I hit the shift button, simply nothing happens. No...
  5. Honda rancher 420 2018 starting problem

    ATV Media
    So on my 2018 Honda rancher 420 that I bought not long ago it had a click one single click on the solenoid when I hit the start button. So I got a new battery thinking it was the problem. Well I cranked it up and ran it for awhile and before that every now and then I would have to hit the...
  6. After bottom end rebuild - bike in gear both ways? (Forward and backward)

    Repair & Maintenance
    So, 2019 Honda Rancher 420 4x4 manual foot shift. I just finished a complete tear down on this bike, and I replaced the crankshaft assembly and bearings, cleaned everything, etc. Everything seems great with the rebuild EXCEPT that in any gear, there is resistance moving the bike forward and...
Top