Honda ATV Forum banner

high idle

  1. Honda Fourtrax 250 1986 idle too high

    nFLOW Motorsports
    Hello, I just bought a Honda Fourtrax 250 1986. When I bought the ATV the owner had just cleaned the carburetor. I reinstall the carburetor and after the idle was too fast. I adjusted the idle screw but the idle was still too fast. I looked if there was no vaccum leak and nothing was to report...

  2. Honda Fourtrax 1986 250

    Repair & Maintenance
    Hello, I just bought a Honda Fourtrax 250 1986. When I bought the ATV the owner had just cleaned the carburetor. I reinstall the carburetor and after the idle was too fast. I adjusted the idle screw but the idle was still too fast. I looked if there was no vaccum leak and nothing was to report...

  3. Idle will not adjust down

    Repair & Maintenance
    Hello I have a 2001 Recon 250. The idle screw will not do anything. I can close it off completely or open it up all the way and there is no change in the idle. It idles at around 2000 rpm unless I pull out the choke. With the choke out about 3/4 of the way it idles fine, but I should not...
Top