Honda ATV Forum banner

brakes

  1. Rim won't clear the caliper

    Repair & Maintenance
    Alright, so I've got a Fourtrax 300 4x4 and decided to change the brakes, only to find the wheel cylinders were completely seized. I decided to do a disc brake conversion kit (SuperATV). Everything went on fine and I bled the brakes and to my surprise, the wheels didn't fit on. I saw on the...
  2. Honda Recon 250es front brakes wont work.

    Honda TRX
    Hi Everyone, I am new to the forum. I just bought a used 2009 Recon 250 ES a couple months back and the front brakes don't work very well at all. They will only engage when the brake lever is squeezed as tight as it can go, and even then I barely get the brakes to engage. I've looked at the...
  3. Honda rancher 350 4x4 2006

    I was wondering if anyone can help me. So when ever I press my brakes on my ATV the gear light will start blinking. But it is something dealing with when ever I press my brake it interferes will my gear Instigator. Plz let me know if you know what the problem is or text me at 252 562 4838 Thanks
  4. Brake rebuild 02' 300EX

    Brakes & Suspension
    Hello there, Perhaps you could help me...I am rebuilding the brakes on my 2002 300EX. I have removed all three calipers, dissassembled them, and cleaned all the pistons, seals, yada yada yada. My first question is about bleeding the front brakes. Although it does not say explicitly in the...
  5. Rear brakes on an 05 400ex

    Brakes & Suspension
    I just upgraded from a 300ex and bought a used 2005 400ex. I got a good deal on it mostly because it had been stripped down to replace the rear axle with an aftermarket one as well as the brake rotor, sprocket, and rims and tires. well it was never fully put back together and i was having some...
  6. 300EX rear brake caliper C-clip

    Honda TRX
    I replaced my carrier last week. I am redoing the rear brakes right now. while I am waiting for the new pads to come in I thought I would just hook up th brake caliper back on to the brake mounting bracket. However, I cannot seem to get the C-clip (holds the brake mounting bracket) back onto the...
  7. rear brake master cylender problems

    Brakes & Suspension
    I have a 87 Honda trx250x. I was having problems with my rear brakes so i took them apart and it turned out I wasn't getting any oil out of the hose so i took the master cylinder apart to clean out all the gunk. I tried to put it back together but the gaskets bend and im afraid ill break it. Any...
  8. Brake Help???

    Brakes & Suspension
    Im wondering if anyone knows if there is a disc brake conversion kit for the rear brakes on honda 300 fourtrax's?? If so, where can i find it? Im also wondering if anyone has any ideas on keeping water out of the rear brake drum? Thanks for any help..
  9. Honda Fourtrax 300 Brakes

    Brakes & Suspension
    My 1998 Honda Fourtrax, The rear brakes lock up after I use them and I have to ride around for them to unlock. I just had all new brakes put in so I need to know how to adjust them or make them quit doing this.
  10. Removal of Brake Cables off Brake Panel

    Brakes & Suspension
    Hello, New to the forum. I'm rebuilding 1985 Honda TRX250 , I have removed the rear axle, axle tubes, brakes, and Etc. I purchase the Honda service manaul for the bike, but I can't figure out how to remove the Brake cables from the rear of the brake panel. I see the wingnut, and have lossen it...
  11. 2003 rancher brake problems

    Brakes & Suspension
    hi,my son is having problems with his brakes.when he pulls in his brake levers or foot pedal,his right front tire will lock up,but his left wont.if any1 can help,plz do! thnx
  12. Brake Self-Engages

    Brakes & Suspension
    I have a 2004 Recon ES. The back brakes have begun to squeel and are catchy when engaged. I'm sure they need replaced. However, I've also noticed that if I turn my handlebars to the right, the back brakes engage without pressing the foot brake or the handle. I have turned the 4 wheeler off...
Top