Honda ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 12 Results
  1. Performance Modifications
    Does anybody know if you can bolt a 450 swing arm and rear end onto a 300 4x2. I'm running on a really steep hill. The 450 swing arm should push my rear wheel back about an inch and should be slightly wider as well. The beraring kit is the same where it mates up to the frame. I know I would...
  2. ATV General Discussion
    I came across one of these for 950 should I buy it an what would I need to fix the spun bearing
  3. Brakes & Suspension
    Anybody know where you can still buy 300 4x4 control arms that are new or aftermarket? Pretty sure mines a 91. I was told Honda finally discontinued them. Broke my right lower last week and may have to find a used one on EBay.
  4. Honda FourTrax
    I parked my 300 last night and went to take it out and it has no spark. None of the dash lights worked before but it ran fine. I don’t have a battery in it but hooked up battery jumper and it turns over just like it did before. I believe that all the sensors work still because it will not turn...
  5. ATV Parts for Sale
    Hello new to the site. I've had good luck with a similar site for jet ski parts. But at the moment I'm currently on the look out for a rear differential/final drive for my 1995 fourtrax 300fw 4x4 I will rebuild it if I have to but I'd rather just swap it for the time being. Broke it plowing...
    $1 USD
  6. Repair & Maintenance
    1993 Honda FourTrax 300 4x4 Just picked this thing up last night and it had sat for a while. Cleaned carb and got it running took it for a short ride and ran fine. Got back on it half hour later tried to start it and it wouldn’t. Checked that it wasn’t in gear and noticed that the shift pedal...
  7. New Member Introductions
    Please HELP I HAVE A 88 TRX300FW!!!! Will the 93-97 or newer rear shocks fit DIRECT TO MY 88 without MODIFICATIONS??????????
  8. Repair & Maintenance
    Been restoring my 1998 Honda fourtrax 300fw I picked up last summer on the cheap with a mud filled rear diff and bum brakes. The pinion bearing removal in these are a pain. It’s 50/50 % chance of getting it out IMO without damming the case housing. Luckily you can buy aftermarket case housings...
  9. ATV General Discussion
    I picked up what I’ve always wanted over the summer. The tank know as the fourtrax 300. it came in for brake work as a 18 year old boy got a great deal from an elderly man holding on to this. After a few hundred bucks in brake work he took it home and put brand new rims and tires on and took it...
  10. Honda TRX
    So for a background, I've got a 2000 Fourtrax 300FW, and I wanna know if the oil cooler from the 450's oil lines will fit onto the Fourtrax's oil lines. I think it would be a good idea to install an oil cooler since I am planning on doing some performance mods. The eBay listing I saw for the 450...
  11. Repair & Maintenance
    My father and I are digging the old quad out of the garage after being parked for the last decade or more. It was put away because of a strange chirping noise coming from the motor. We are not sure if it is the vavle train as it starts right up, and runs like a champ. motor seems to run with...
  12. Repair & Maintenance
    Hey Ya'll, this is this is my first post on this forum and I need some serious help. I have a 1995 Fortrax 300 that I am at my wits end and am about ready to shoot the dang thing. It went thru a bark fire backing 2004 where the fenders were deformed but the other 300 that was in there is still...
1-12 of 12 Results
Top