Honda ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Repair & Maintenance
    There are a few parts in the transmission that are discontinued and dont really understand why so I just wanted to see if theres an alternate source to get these aside from scavenging another engine. Item 5 PN23219HA0000 OIL GUIDE PLATE Item 6 PN23224HA0680 COUNTERSHAFT COLLAR Item 32...
  2. Honda FourTrax
    I have a 1987 Honda trx250x I have got a new carburetor and I need some help with tuning I have 150-178 main and 38-55 slow (pilot) jets can some one help me get a good tune on this i need to sell it soon
  3. Honda FourTrax
    Hi All, I picked up a second-hand 1987 TRX350 (says it was built 10/86 on the frame) and while I've been able to get it to start and idle reliably, it's been having this strange symptom, where sometimes I go to shift it into gear from neutral and it dies as if the kill switch was just engaged...
  4. Honda FourTrax
    Hey y'all new to the forums. I have read so many of these I know my problem I just cannot find a solution. And if at all possible I need this item Literally ASAP. I am supposed to have this bike running by this Sunday. Anyhow, 1987 TRX350D CDI box I have called everyone and everyone says...
  5. Repair & Maintenance
    Hey, I’ve recently just rebuilt the top end of my Suzuki Lt230e quad and have everything put together but it doesn’t run right and doesn’t got out of first gear. It also backfires out of the exhaust and rebuilt my carb a few weeks ago. I don’t know what’s going on and have been working hard but...
  6. Repair & Maintenance
    Hello i have a 1986 Honda Fourtrax Foreman 350A i just recently bought a new carb for it from a atc 350x works good but atv just constantly blows gas and air out the back of the carb i tried to adjust the valves to stock specs 0.08 0.003 on intake and exhuast on the compression stroke on TDC i...
  7. Honda TRX
    Hi All, I'm in the process of fixing up a 1987 TRX350 4x4 and have low compression as well as a lot of carbon build up. I'm assuming that I'll have to get the cylinder bored out and replace piston/rings. Can anyone let me know where I can get oversize parts? I'm having some trouble finding...
  8. Repair & Maintenance
    Here is my problem with my bike, starts and runs perfect i'll be running down the road and all of a sudden it is like the motor cuts out if i downshift quickly back to neutral it will stay running but if i don't it shuts down. It starts right away then when i put it in gear it stalls, starts...
1-8 of 8 Results
Top